Are you sure you want to perform this action?
Uncommon strength, common sense
The SCP series is a range of extremely powerful compact dual-channel power amplifiers for commercial use. These half-19” devices can be used in stereo low impedance or 70/100V bridge mode. Five different models serve a wide range of applications, with power ratings ranging from 120W up to 1000W in a half-19” rack space housing.
The compact and elegant design of the half 19” rack space enclosure allows for single installation in a 10.5” equipment rack or side-by-side (two devices) in a 19” equipment rack. Of course, desktop installation or mounting in an equipment rack using the MBS310 series mounting adapters is possible.
You may wonder if so much power in such a small enclosure could cause some heating issues. Not at all. The SCP series is designed in a unique way so that optimal cooling is established. This is done by passive cooling on the SCP206 and SCP212 and active cooling on the SCP224, SCP230, and SCP250 to improve thermal comfort without the need for additional actions.
A connection to the WP2xx series input wall panels (see page 76) or volume controllers can be made via the RJ45 connector on the back of the SCP. This allows for a cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.
Equipped with a standby mode switch, the SCP series will enter an energy-saving standby mode after a period of inactivity, making it unique in the market. This feature, together with the overall energy-efficient design, makes the SCP meet the high standards of the Energy Star certification.
Combining the SCP series with a suitable pre-amplifier or wall-mounted input panel creates a relatively powerful and complete solution for background music installations.
System specifications | ||||
---|---|---|---|---|
RMS/AES power handling | @ 70/100 V Bridge | 1000 W | ||
Frequency | Response (± 3 dB) | 20 Hz - 20 kHz | ||
THD+N (@ 1 kHz) | < 0.05% | |||
Signal / Noise | > 95 dB | |||
Indicators | VU LED bar (front) | |||
Outputs | Voltage / Impedance | 70-100 V / 4 Ω | ||
Connector | 4-pin Euro Terminal Block (Pitch - 5.08 mm) | |||
Inputs | Connector | 3-pin Euro Terminal Block (Pitch - 3.81 mm) | ||
IEC C14 Connector | ||||
Other | Connector | RJ45 | ||
Type | 1 x Remote Volume controller | |||
1 x Remote Wall Mixer | ||||
Priority mute contact | ||||
Stereo - BTL/HPF mode configuration | ||||
Power | Standby switch | |||
Supply | 100 ~ 240 V AC / 50 ~ 60 Hz | |||
Control | Gain control potentiometers (rear) | |||
Stereo Low Z & Mono High Z switch | ||||
70/100V switch | ||||
Cooling | Temperature controlled fan | |||
Technology | Class-D | |||
RMS/AES power handling | @ 4 Ω Stereo | 2 x 500 W | ||
@ 8 Ω Stereo | 2 x 250 W |
Product Features | ||||
---|---|---|---|---|
Dimensions | 217.5 x 44 x 300 mm (W x H x D) | |||
Weight | 2.90 kg | |||
Construction | Steel | |||
Mounting | 1/2 19” / 1 HE or tabletop | |||
Accessories | Optional | WP2xx Universal wall panel | ||
19” Rackmount adapter |
Optimal coolingCould so much power in such a small enclosure cause some heating issues? The SCP series is designed uniquely so that optimal cooling is established, with passive cooling on the SCP206 and SCP212 and active cooling on the SCP224, SCP230, and SCP250. |
*Note: AUDAC operates a policy of continuous development. AUDAC reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer's web page for the most up-to-date specifications and product details www.audac.eu For the most up-to-date Software and Firmware visit www.audac.eu.
Are you sure you want to perform this action?