Home Category Exclusive Brands AUDAC ALTI4M 2-way 4" design wall sound projector

ALTI4M 2-way 4" design wall sound projector

MSRP: $267.00 USD
AUALTI4M/B

"Don't feel like hanging around?"

The ALTI4M is a variant of the ALTI pendant speakers, featuring a die-cast mounting bracket for wall & ceiling mount purposes. This allows the same audio system design and identity throughout the entire installation in case some areas are not allowing pendant solutions being used due to the ceiling heights or structures. Acoustics and construction are identically crafted, while connections are made through AWX-5 connectors.

The ALTI4M features a 2-way 4” driver combination with a coaxially mounted 1” soft dome tweeter and is fitted with a phase plug for excellent off-axis performance. The 2-way combination with a high-quality polypropylene enclosure and acoustic engineering craftsmanship guarantees premium performance for demanding applications. A continuous power handling of 30 Watt (RMS) and maximum power handling of 60 Watt is achieved.

Variant MSRP
Black version AUALTI4M/B $267.00 USD
White version AUALTI4M/W $267.00 USD
Would you like a Demo?
  • Stunning designed and elegant looking ABS enclosure
  • Innovative & unique design
  • Multi-tapping 100V line transformer
  • AWX5™ waterproof connector
  • Countless mounting possibilities

70/100V 16 Ohm

Max. Power : 60 W
RMS Power : 30 W
Speaker type : 2-way coaxial
Drivers : 4”
Impedance : 16 Ω
Dispersion Conical : 165° (average 500 Hz to 5 kHz @ -6 dB)
Line Transformer Tappings 1 : 208 Ω - 100 V / Not used - 70 V / 24 W
Line Transformer Tappings 2 : 417 Ω - 100 V / 24 W - 70 V / 12 W
Line Transformer Tappings 3 : 833 Ω - 100 V / 12 W - 70 V / 6 W
Connectors : Waterproof AWX-5 connector
Sensitivity (1W/1m) : 80 dB
Sound Pressure (Max. W/1m) @ 16 Ω : 95.1 dB
Frequency Range (-10 dB) : 65 Hz - 20 kHz
Frequency Response (± 3 dB) : 85 Hz - 20 kHz
Dimensions : 205 x 170 x 258 mm (W x H x D)
Connection cable length : 0.7 m
Mounting & handling : 2-way Revolving mounting bracket
Construction : Polypropylene
Front finish : Aluminium grill
Accessories Included : 2-way Revolving mounting bracket
Accessories Included : 5-pin connection cable (70 cm)

 

WIDE OPENING ANGLEWIDE OPENING ANGLE

The wide opening angle of the speaker guarantees an exceptional dispersion in all different kinds of applications and locations with high ceilings and large open spaces. The carefully matched components and construction guarantee optimal coverage over the entire frequency range.

UNIQUE MOUNTING POSSIBILITIESUNIQUE MOUNTING POSSIBILITIES

A die-cast mounting bracket makes wall & ceiling mounting possible at any desired angle. This swiveling bracket allows the same audio system design and identity throughout the entire installation. Some areas do not allow pendant solutions to be used due to the ceiling heights or other structures.

MOISTURE RESISTANT DRIVERMOISTURE RESISTANT DRIVER

Thanks to a special coating applied to the drivers, the ALTI series are also suitable for use in applications with high levels of humidity such as outdoor terraces, bathrooms, or many more!

EASE ADDRESSEASE ADDRESS

GENERIC MODELING SOFTWARE FOR DISTRIBUTED LOUDSPEAKER SYSTEMS

EASE Address is a software that allows the modeling of acoustic sources, distributed loudspeaker systems in particular, in two dimensions.

Find out more about EASE Address

EASE FOCUS 3EASE FOCUS 3

UNIVERSAL SOUND SYSTEM MODELING IN 3D

EASE Focus 3 is an acoustic simulation program for 3D modeling of line arrays, sub arrays, columns and conventional loudspeakers.

Find out more about EASE Focus 3

 

AWX5™ CONNECTOR

Weatherproof connectivity and adjustments in one connection

The AWX5™ connector is a specially designed connector that prevents the use of extra equipment and adjusting to a speaker system for setting the desired power tapping and maintaining a IP55 waterproof connection. The power setting can be made by simply rotating the connector. On the cable part of the connector is a white dot displayed. Depending on the position of the white dot, the desired power can be selected. When inserted a screwable outer-ring with an inner rubber seal guarantees a superior connection in any type of weather condition. The power tapping can be set in 3 adjustable steps for 100V and one step for 8 Ohm standard low impedance applications.

Find out more about AWX5 Connector

*Note: AUDAC operates a policy of continuous development. AUDAC reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer's web page for the most up to date specifications and product details www.audac.eu For the most up to date Software and Firmware visit www.audac.eu.

Accessories


Related Products


Product Videos